ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric

FREE Shipping

ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric

ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric

RRP: £105.00
Price: £52.5
£52.5 FREE Shipping

In stock

We accept the following payment methods


Thus builders of, for example, locomotives, firearms, or textile machinery were likely to make their own taps and dies. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions. Solid dies cut a nominal thread form and depth, whose accuracy is subject to the precision the die was made with, and the effects of wear.

Safety clutch: The built in safety mechanism operates as soon as the set torque limit is attained to save the tap from breakage. Spiral point taps are usually used in holes that go all the way through the material, so that the chips can escape. Whether manual or automatic, the processing of tapping begins with forming (usually by drilling) and slightly countersinking a hole to a diameter somewhat smaller than the tap's major diameter.The tap set had a handy little tool for measuring this, but it is also easily possible to count threads next to a ruler.

Spiral flute taps are widely used in high speed, automatic tapping operations due to their ability to work well in blind holes.This feature gives the taper tap a very gradual cutting action that is less aggressive than that of the plug tap. Your hole will be smaller than the diameter of the bolt, because the threads tapped will increase the diameter.

We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Prior to drilling the hole you will eventually tap, determine what size you need to drill for the bolt you are trying to screw in. These stainless steel German Made taps are grooved to make the job of creating threaded holes much simpler.

Although in general machine tapping is more accurate, tapping operations have traditionally been very tricky to execute due to frequent tap breakage and inconsistent quality of tapping.

Easy Insert】There is a tiny hole on the opposite end of the thread, it is for holding the sewing machine needle while you easily insert it into the machine. Bottoming tap or plug tap The tap illustrated in the top of the image has a continuous cutting edge with almost no taper — between 1 and 1. Die nuts, also known as rethreading dies, are dies made for cleaning up damaged threads, [8] have no split for resizing and are made from a hexagonal bar so that a wrench may be used to turn them. However, it is important to make sure the threads begin in the same place within the hole to avoid cross threading. g., ⅜ inch for a ⅜"-16 tap), and 1 / N {\displaystyle 1/N} is the thread pitch ( 1⁄ 16 inch in the case of a ⅜"-16 tap).Once the hole and material is cleaned, test the threads of the hole with the bolt or machine screw you plan on using. The work piece (blank) to be threaded, which is usually slightly smaller in diameter than the die's major diameter, is given a slight taper (chamfer) at the end that is to be threaded. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop